TIRES WITHOUT BANDAGE
Bandless tires are categorized as solid tires. As well bandage tires, they have a high carrying capacity and are used at low speeds. Therefore, the purpose and scope of tires of bandless and bandage types are similar.
Application area
Hoisting-and-transport equipment used in warehouses, at airfields, in ports is equipped with bandless tires. The tires are designed for use on asphalt and dirt roads, concrete, wood, metal surfaces in all climatic zones at ambient temperatures from minus 45 to plus 55 ° C.
Bandless tire design
Bandless tires are a solid rubber ring reinforced (or not reinforced) with a metal cord in the area of the landing part.
Advantages of Bandless Tires Compared to Bandage Tires
Bandless tires are not attached chemically, but by pressing onto the wheel with an interference fit. Thus, a number of operations are excluded from the production cycle – the manufacture and transportation of metal fittings, its preparation for rubberizing, including shot blasting, degreasing, application and drying of adhesive film.
In addition, the tires of the bandless type do not damage or wear out the rim seating surface, which excludes the possibility of the rim going out of service due to the number of assembly and disassembly operations performed with it, which is limited by regulatory documents, and does not affect the reliability of the tire fit.
Technical characteristics and prices of bandless tires by “Uralshina”
Designation | Tire dimensions, mm | Tire weight, kg, no more | МMax. speed, km / h | Maximum admissible | Name of the regulatory document | ||||
outside diameter | tire landing diameter / | mandrel landing diameter / | mandrel width | leading | managed | ||||
250х100 | 250 ±3 | 178/178 -0,08 | 128 +0,53 | 100 -0,23 | 2,7 | 43 | 4410 (450) | GOST 5883-89 | |
305х62 | 305 ±3 | 248/248 -0,08 | 202 | 62 | 1,7 | 16 | 3680 (375) | GOST 5883-89 | |
400х100 | 400 ±3 | 340 -1,00/340 -0,36 | 310 +0,05 | 100 -0,22 | 5,8 | 16 | 7850 (800) | GOST 5883-89 | |
400х100 (С-115) | 267 ±0,5/267 -0,10 | 236 +0,30 | 96 -0,23 | 7,5 | 7,5 | 3038 (310) | ТУ 2527-023- | ||
400х128 | 332 -0,10/330 -0,10 | 305 +0,10 | 128 -0,26 | 5,6 | 16 | 11770 (1200) | GOST 5883-89 | ||
410х100 | 410 ±3 | 265/266 -0,10 | 236+0,30 | 103 -0,23 | 8 | 16 | 2450 (250) | GOST 5883-89 | |
400х125 cone. | 400 ±3 | 288/310 | 290 +0,32/ 288 ±0,1 | 125 -0,10 | 7 | 11300 (1105) | 9860 (1005) | TU 38.304-13 | |
450х160 cone. | 450 ±3 | 320/348,2 | 328 +0,36/ 320 ±0,1 | 160 -0,10 | 10,6 | 16700 (1700) | TU 38.304-13 | ||
500х16 cone. | 500 ±3 | 370/398,2 | 378 +0,36/ 370 ±0,1 | 160 -0,10 | 12,5 | 16 | 18050 (1840) | TU 38.304-13 | |
510х110 | 510 ±3 | 432 +0,5-1,00/ 432,2 -0,26 | 400 +0,12 | 110 -0,23 | 8,2 | 16 | 10790(1100) | GOST 5883-89 | |
520х152 | 520 ±3 | 430 ±0,5/430 -0,12 | 405 +0,25 | 152 -0,26 | 12,3 | 16 | 19620 (2000) | GOST 5883-89 | |
630х155 | 630 ±3 | 538 +0,5-1,00/ 538,5 -0,14 | 505 +0,45 | 155 -0,26 | 14,5 | 16 | 6080 (620) | GOST 5883-89 | |
630х160 cone. | 435 +0,5-1,00/ 538,5 -0,14 | 455 +0,40/ 435 ±0,1 | 165 -0,10 | 25,5 | 6 | 18000 (1800) | TU 2527-077- | ||