Application area
Bandage tires are used on special purpose wheeled vehicles with high load and low speed performance.
An example is the handling equipment used in warehouses, airfields, and ports.
Due to the low degree of shock absorption, this type of tire is classified as the most rigid, therefore, they are equipped with carts, lifts, stackers, forklifts, port roll trailers.
Features of bandage tires:
– high carrying capacity;
– small deformation;
– resistance to mechanical damage, punctures, wear;
– good maneuverability.
Tire construction
Bandage tires consist of an elastic rubber tread and a metal band, bonded together by a chemical (adhesive) method. An interference fit is pressed onto the wheel rim. The preload is provided due to the difference in the diameters of the outer rim of the wheel and the tire. The tire of the shroud type is installed on the axle only in a pre-assembled state.
The thickness of the shock-absorbing layer of the bandage tires is minimal, so they are most demanding on the quality of the floor or the road.
Technical characteristics of tires of bandage (disc) type, adhesive fastening
Designation | Tire dimensions, mm | Tire weight, kg, no more | Max. speed, km / h | Maximum admissible tire load, N (kgf) | Name of the regulatory document | ||||
outside diameter tires | tire landing diameter / outer mandrel diameter | mandrel landing diameter / connector diameter | mandrel width | leading | managed | ||||
200х60 | 200 ±3 | 136 -0,16 | 126 +0,18 | 60 -0,16 | 4 | 16 |
| 2745 (280) | ГОСТ 5883-89 |
200х65 | 130 -1,00 | 110 +0,07 | 65 -0,20 | 3 | 16 |
| 2940 (300) | ||
200х80 | 136 -0,25 | 126 +0,25 | 80 -0,19 | 2,6 | 16 |
| 3920 (400) | ||
200х50х126 | 136 -0,26 | 126 +0,08 | 50 -0,17 | 1,7 | 16 | 2120 (215) | 1815 (185) | ||
200х60х126 | 136 -0,26 | 126 +0,08 | 60 -0,17 | 2,1 | 16 | 2750 (280) | 2355 (240) | ||
200х80х126 | 136 -0,26 | 126 +0,08 | 80 -0,17 | 2,7 | 16 | 3920 (400) | 3335 (340) | ||
200х100х126 | 136 -0,26 | 126 +0,08 | 100 -0,22 | 3,5 | 16 | 5150 (525) | 4365 (445) | ||
250х60 | 250 ±3 | 178 -0,25 | 168 +0,25 | 60 -0,19 | 5,4 | 16 |
| 3190 (325) | |
250х100х168 | 178 -0,26 | 168 +0,08 | 100 -0,23 | 4,6 | 16 | 6180 (630) | 5250 (535) | ||
250х125х168 | 178 -0,26 | 168 +0,08 | 125 -0,26 | 5,8 | 16 | 7850 (800) | 6670 (680) | ||
260х112 | 260 ±3 | 202 -0,29 | 178 +0,04 | 112 -0,20 | 8,2 | 16 |
| 7550 (770) | |
270х125 | 270 ±3 | 185 -0,10 | 165 +0,08 | 125 -0,26 | 9,28 | 16 |
| 9650 (985) | |
320х80х225 | 320 ±3 | 240 -0,30 | 225 +0,08 | 80 -0,26 | 6,22 | 16 | 5430 (555) | 4610 (470) | |
320х100х225 | 240 -0,30 | 225 +0,08 | 100 -0,20 | 7,84 | 16 | 7260 (740) | 6180 (630) | ||
320х125х225 | 245 -0,30 | 225 +0,08 | 125 -0,20 | 11,5 | 16 | 9810 (1000) | 8340 (850) | ||
320х160х225 | 240 -0,30 | 225 +0,08 | 160 -0,26 | 12,75 | 16 | 12750 (1300) | 10840 (1105) | ||
375х85 | 375 ±3 | 309 -0,32 | 289 +0,05 | 85 -0,19 | 8,4 | 16 |
| 5880 (600) | |
380х178 | 380 ±3 | 310 -0,14 | 285,75 +0,14 | 178 -0,25 | 24 | 16 |
| 21600 (2200) | |
400х80х290 | 400 ±3 | 310 -0,34 | 290 +0,10 | 80 -0,20 | 9,85 | 16 |
| 5495 (560) | |
400х100 | 330 -0,34 | 310 +0,10 | 100 -0,23 | 12,3 | 16 | 11575 (1180) | 7850 (800) | ||
400х125х290 | 310 -0,32 | 290 +0,13 | 125 -0,25 | 15,67 | 16 |
| 9860 (1005) | ||
400х128 | 325 -0,10 | 305 +0,10 | 128 -0,26 | 15,76 | 16 | 15100 (1540) | 11750 (1200) | ||
400х160х290 | 310 -0,34 | 290 +0,10 | 160 -0,26 | 20,31 | 16 | 15100 (1540) | 12850 (1310) | ||
400х200х290 | 310 -0,34 | 290 +0,10 | 200 -0,30 | 25,56 | 16 | 19600 (2000) | 16675 (1700) | ||
450х150 | 450 ±3 | 366 -0,38 | 344 +0,12 | 150 -0,26 | 20,5 | 16 |
| 14700 (1500) | |
450х160х330 | 350 -0,36 | 330 +0,89 | 160 -0,30 | 25,5 | 16 | 16700 (1700) | 14175 (1445) | ||
450х200х330 | 350 -0,34 | 330 +0,34 | 200 -0,30 | 30 | 16 | 21600 (2200) | 18345 (1870) | ||
470х140 | 470 +1-2 | 410 -0,50 | 304 +0,32 | 140 -0,25 | 30,2 | 48 |
| 135032(1374) (направл. | ТУ 2525-024- |
500х160х375 | 500 ±3 | 400 -0,36 | 375 +0,14 | 160 -0,25 | 30,4 | 16 |
| 15350 (1565) | ГОСТ 5883-89 |
510х110 | 510 ±3 | 420 -0,10 | 400 +0,12 | 110 -0,23 | 19,1 | 16 |
| 10800 (1100) | |
510х126 | 430 -0,34 | 410 +0,12 | 126 -0,26 | 21,3 | 16 |
| 13500 (1375) | ||
520х152 | 520 ±3 | 424 -1,00 | 404 +0,12 | 152 -0,26 | 28,9 | 16 |
| 19620 (2000) | |
550х150х370 | 550 ±3 | 447 -0,40 | 370 +0,06 | 149,3 -0,20 | 72,7 |
|
|
| ТУ 2527-077- |
559х305х406,4 | 559 ±3 | 430 -0,40 | 405 +0,40 | 305 -0,32 | 72 | 16 |
| 48020 (4900) | ТУ 2527-021- |
560х200х415 | 560 ±3 | 440 -0,40 | 415 +0,10 | 200 -0,30 | 46,5 | 16 | 27500 (2800) | 23350 (2380) | ГОСТ 5883-89 |
630х125х480 | 630 ±3 | 510 -0,70 | 480 +0,09 | 125 -0,25 | 36,3 | 16 | 16350 (1670) | 13930 (1420) | |
630х160х480 | 512 -0,34 | 480 +0,10 | 160 -0,23 | 44 | 16 | 23545 (2400) | 20010 (2040) | ||
630х200х480 | 512 -0,14 | 480 +0,14 | 200 -0,30 | 59 | 16 | 28400 (2900) | 24180 (2465) | ||
670х140 | 670 +1-2 | 580 -0,70 | 500 +0,70 | 139 -0,30 | 40,7 | 48 | 19870(2028) |
| ТУ 2525-024- |
711х356х559 | 711±3 | 595 -0,28 | 559 +0,40 | 356 -0,36 | 133,5 | 25 |
| 57200 (5830) | ТУ 2527-010- |
810х185 | 810 ±3 | 687 -0,50 | 660 +0,50 | 185 -1,00 | 71,5 | 16 | 24520(2500) |
| ТУ 2527-077- |